The EP103T LVDS transmitter supports transmission between the host and the flat panel display up to SXGA+ resolutions. The transmitter converts 25 bits (8bits/color, 2 dummy bits) of Low Voltage TTL data and 3 control bits into 4 LVDS (Low Voltage Differential Signal) data streams. At a maximum input clock rate of 135MHz, each LVDS differential data pair speed is 945Mbps, providing a total throughput of 3.78Gbps. The transmitter can be configured to input clock rising edge or falling edge strobe through an external pin. Support 10MHz to 135MHz clock rates for
HVGA to SXGA+ resolution
Up to 3.78Gbps bandwidth
PLL requires no external components
Cycletocycle jitter rejection
3.3V to 1.8V Low Voltage TTL tolerant Input
Programmable data and control strobe select
Power down mode supported
Serial digital video transmitter for HD video surveillance and HDcctv applications
Dual rate operation 270Mbps and 1.485Gbps
Backward compatible with HDcctv 1.0 and HDSDI (ST 292)
Integrated High Definition Visually Lossless CODEC (HDVLC™) for extended cable reach
500m over 755 (5C) CCTV coax
300m over 753 (3C) CCTV coax
150m over Cat5e/6 UTP cable
Configurable 50/75ohm cable driver output, for both coaxial and twisted pair cable transmission
Integrated audio embedder with support for up to 4 channels of I2S serial digital audio at 32kHz, 44.1kHz and 48kHz sample rates
Downstream ancillary data insertion
Supports both 720p and 1080p HD formats
1080p 25/29.97/30fps
720p 25/29.97/30/50/59.94/60fps